Diseño y control digital de un convertidor elevador entrelazado para sistemas de carga/descarga de baterías

Palabras clave: Convertidor entrelazado, convertidor elevador, batería, control digital

Resumen

Este trabajo presenta la metodología de diseño de un control digital para reducir el rizado en la corriente que se inyecta a la batería por medio de los convertidores que procesan la energía de carga y descarga, el cual es uno de los parámetros indicados en la literatura que disminuyen el tiempo de vida de las baterías. Este trabajo tiene como alcance mostrar el procedimiento de diseño e implementación de la estrategia propuesta sobre un convertidor entrelazado. La metodología implementada se presenta por medio de cuatro etapas (i) modelado del sistema batería-convertidor-carga, (ii) diseño de control digital basado en el modelo, (iii) diseño de la plataforma práctica donde se presenta la etapa de instrumentación e implementación utilizando un dispositivo embebido y (iv) la validación práctica del funcionamiento de la estrategia presentada y la disminución del rizado inyectado en la batería. Por medio de la metodología presentada se logra evidenciar el correcto desempeño del control digital cumpliendo los parámetros de diseño para diferentes modos de operación de carga de la batería y reduciendo el rizado de corriente en la batería entre un 50 % a 65 %. Esta reducción protege la vida útil de la batería y de las fuentes o cargas conectadas al sistema. Adicionalmente, permite que los algoritmos de estimación de estado de carga y estado de salud incrementen su precisión, lo que conlleva a una mejora en los protocolos de mantenimiento y planificación de reemplazo de los elementos.

Biografía del autor/a

Cristian Escudero Quintero, Instituto Tecnológico Metropolitano, Colombia

Medellín-Colombia, cristianescudero200038@itm.edu.co

Santiago Acevedo Pérez, Instituto Tecnológico Metropolitano, Colombia
Juan Pablo Villegas Ceballos, Instituto Tecnológico Metropolitano, Colombia

Medellín-Colombia, juanvillegas@itm.edu.co

Daniel González Montoya*, Instituto Tecnológico Metropolitano, Colombia

Medellín-Colombia, danielgonzalez@itm.edu.co

Sergio Serna Garcés, Instituto Tecnológico Metropolitano, Colombia

Medellín-Colombia, sergioserna@itm.edu.co

Referencias bibliográficas

F. Slah; A. Mansour; M. Hajer; B. Faouzi, “Analysis, modeling and implementation of an interleaved boost DC-DC converter for fuel cell used in electric vehicle,” Int. J. Hydrogen Energy, vol. 42, no. 48, pp. 28852–28864, Nov. 2017. https://doi.org/10.1016/j.ijhydene.2017.08.068

P. Thounthong; S. Raël; B. Davat, “Energy management of fuel cell/battery/supercapacitor hybrid power source for vehicle applications,” J. Power Sources, vol. 193, no. 1, pp. 376–385, Aug. 2009. https://doi.org/10.1016/j.jpowsour.2008.12.120

S. Bashash; H. K. Fathy, “Transport-Based Load Modeling and Sliding Mode Control of Plug-In Electric Vehicles for Robust Renewable Power Tracking,” IEEE Trans. Smart Grid, vol. 3, no. 1, pp. 526–534, Mar. 2012. https://doi.org/10.1109/tsg.2011.2167526

S. I. Serna-Garcés, “Contributions to the efficiency and safety of stand-alone DC microgrids,” (Tesis Doctoral), Universidad Nacional de Colombia, Manizalez, Colombia, 2018. https://repositorio.unal.edu.co/handle/unal/69113

J. Li; M. A. Danzer, “Optimal charge control strategies for stationary photovoltaic battery systems,” J. Power Sources, vol. 258, pp. 365–373, Jul. 2014. https://doi.org/10.1016/j.jpowsour.2014.02.066

M. A. Hannan; F. A. Azidin; A. Mohamed, “Hybrid electric vehicles and their challenges: A review,” Renew. Sustain. Energy Rev., vol. 29, pp. 135–150, Jan. 2014. https://doi.org/10.1016/j.rser.2013.08.097

C. Pillot, “Battery Market Development for Consumer Electronics, Automotive, and Industrial: Materials Requirements & Trends,” in 5th Israeli Power Sources Conference 2015, Israel, pp. 1–40. https://docplayer.net/21143965-Battery-market-development-for-consumer-electronics-automotive-and-industrial-materials-requirements-and-trends.html

M. R. Palacin; A. de Guibert, “Why do batteries fail?,” Science, vol. 351, no. 6273, pp. 1253292–1253292, Feb. 2016. https://doi.org/10.1126/science.1253292

O. Erdinc; B. Vural; M. Uzunoglu, “A dynamic lithium-ion battery model considering the effects of temperature and capacity fading,” in 2009 International Conference on Clean Electrical Power, Capri. 2009, pp. 383–386. https://doi.org/10.1109/iccep.2009.5212025

X. Liu; S. Qin; Y. He; X. Zheng; C. Cao, “SOC estimation of the lithium-ion battery with the temperature-based Nernst model,” in 2016 IEEE 8th International Power Electronics and Motion Control Conference (IPEMC-ECCE Asia), Hefei. 2016, pp. 1419–1422. https://doi.org/10.1109/IPEMC.2016.7512498

C. A. Ramos-Paja; A. J. Saavedra-Montes; J. D. Bastidas-Rodríguez, “Cargador de baterías fotovoltaico con control por modos deslizantes y limitación de la derivada de corriente de carga,” TecnoLógicas, vol. 21, no. 42, pp. 129–145, May. 2018. https://doi.org/10.22430/22565337.784

M. Uno; K. Tanaka, “Influence of High-Frequency Charge-Discharge Cycling Induced by Cell Voltage Equalizers on the Life Performance of Lithium-Ion Cells,” IEEE Trans. Veh. Technol., vol. 60, no. 4, pp. 1505–1515, May. 2011. https://doi.org/10.1109/TVT.2011.2127500

S.-C. Huang; K.-H. Tseng; J.-W. Liang; C.-L. Chang; M. Pecht, “An Online SOC and SOH Estimation Model for Lithium-Ion Batteries,” Energies, vol. 10, no. 4, p. 512, Apr. 2017. https://doi.org/10.3390/en10040512

P. A. Topan; M. N. Ramadan; G. Fathoni; A. I. Cahyadi; O. Wahyunggoro, “State of Charge (SOC) and State of Health (SOH) estimation on lithium polymer battery via Kalman filter,” in 2016 2nd International Conference on Science and Technology-Computer (ICST), Yogyakarta. 2016, pp. 93–96. https://doi.org/10.1109/ICSTC.2016.7877354

M.-H. Hung; C.-H. Lin; L.-C. Lee; C.-M. Wang, “State-of-charge and state-of-health estimation for lithium-ion batteries based on dynamic impedance technique,” J. Power Sources, vol. 268, pp. 861–873, Dec. 2014. https://doi.org/10.1016/j.jpowsour.2014.06.083

H. Rahimi-Eichi; U. Ojha; F. Baronti; M.-Y. Chow, “Battery Management System: An Overview of Its Application in the Smart Grid and Electric Vehicles,” IEEE Ind. Electron. Mag., vol. 7, no. 2, pp. 4–16, Jun. 2013. https://doi.org/10.1109/mie.2013.2250351

S. Serna-Garcés; D. Gonzalez Montoya; C. Ramos-Paja, “Sliding-Mode Control of a Charger/Discharger DC/DC Converter for DC-Bus Regulation in Renewable Power Systems,” Energies, vol. 9, no. 4, p. 245, Mar. 2016. https://doi.org/10.3390/en9040245

S. Serna-Garcés; D. González Montoya; C. Ramos-Paja, “Control of a Charger/Discharger DC/DC Converter with Improved Disturbance Rejection for Bus Regulation,” Energies, vol. 11, no. 3, pp. 594, Mar. 2018. https://doi.org/10.3390/en11030594

J. P. Villegas Ceballos; S. I. Serna‐Garcés; D. González Montoya; C. A. Ramos-Paja; J. D. Bastidas‐Rodríguez, “Charger/discharger DC/DC converter with interleaved configuration for DC‐bus regulation and battery protection,” Energy Sci. Eng., vol. 8, no. 2, pp. 530–543, Feb. 2020. https://doi.org/10.1002/ese3.534

M. A. Devi; K. Valarmathi; R. Mahendran, “Ripple current reduction in interleaved boost converter by using advanced PWM techniques,” in 2014 IEEE International Conference on Advanced Communications, Control and Computing Technologies, Ramanathapuram. 2014, pp. 115–119. https://doi.org/10.1109/icaccct.2014.7019291

K. Siri; C. Q. Lee; T.-E. Wu, “Current distribution control for parallel connected converters. I,” IEEE Trans. Aerosp. Electron. Syst., vol. 28, no. 3, pp. 829–840, Jul. 1992. http://dx.doi.org/10.1109/7.256303

R. Giral; L. Martinez-Salamero; S. Singer, “Interleaved converters operation based on CMC,” IEEE Trans. Power Electron., vol. 14, no. 4, pp. 643–652, Jul. 1999. https://doi.org/10.1109/63.774201

D. J. Perreault; J. G. Kassakian, “Distributed interleaving of paralleled power converters,” IEEE Trans. Circuits Syst. I Fundam. Theory Appl., vol. 44, no. 8, pp. 728–734, Aug. 1997. http://dx.doi.org/10.1109/81.611269

S. Vijayalakshmi; E. Arthika; G. S. Priya, “Modeling and simulation of interleaved Buck-boost converter with PID controller,” in 2015 IEEE 9th International Conference on Intelligent Systems and Control (ISCO), Coimbatore. 2015, pp. 1–6. http://dx.doi.org/10.1109/ISCO.2015.7282392

H. M. M. Swamy; K. P. Guruswamy; S. P. Singh, “Design, Modeling and Analysis of Two Level Interleaved Boost Converter,” in 2013 International Conference on Machine Intelligence and Research Advancement, Katra. 2013, pp. 509–514. https://doi.org/10.1109/ICMIRA.2013.107

M. Habib; F. Khoucha; A. Harrag, “GA-based robust LQR controller for interleaved boost DC–DC converter improving fuel cell voltage regulation,” Electr. Power Syst. Res., vol. 152, pp. 438–456, Nov. 2017. https://doi.org/10.1016/j.epsr.2017.08.004

R. Giral; L. Martinez-Salamero; R. Leyva; J. Maixe, “Sliding-mode control of interleaved boost converters,” IEEE Trans. Circuits Syst. I Fundam. Theory Appl., vol. 47, no. 9, pp. 1330–1339, 2000. http://dx.doi.org/10.1109/81.883328

R. W. Erickson; D. Maksimović, Fundamentals of Power Electronics 2nd. ed. . Springer Science & Business Media, 2007.

B. C. Kuo, Automatic control systems. Upper Saddle River, NJ. Prentice Hall PTR, 1987.

T. I. Inc., “ TMS320F2823x Digital Signal Controllers (DSCs),” Dallas, TX, USA, 2016. https://www.ti.com/lit/er/sprz272m/sprz272m.pdf?ts=1603208194464&ref_url=https%253A%252F%252Fwww.ti.com%252Fsitesearch%252Fdocs%252Funiversalsearch.tsp%253FsearchTerm%253DTMS320F2823x

I. Rectifier, “IRF3710PbF HEXFET® Power MOSFET,” California, USA, 2010. https://www.infineon.com/dgdl/irf3710pbf.pdf?fileId=5546d462533600a4015355df95df1947

Renesas Electronics Corporation, “HIP4081A, 80V High Frequency H-Bridge Driver,” Milpitas, California, Estados Unidos. https://www.renesas.com/jp/ja/www/doc/application-note/an9405.pdf

A. Device, “High Voltage, Bidirectional Current Shunt Monitor,” Norwood, Massachusetts,USA, 2017. https://www.analog.com/media/en/technical-documentation/data-sheets/ad8210.pdf

Cómo citar
[1]
C. Escudero Quintero, S. . Acevedo Pérez, J. P. Villegas Ceballos, D. González-Montoya, y S. . Serna Garcés, «Diseño y control digital de un convertidor elevador entrelazado para sistemas de carga/descarga de baterías», TecnoL., vol. 24, n.º 50, p. e1556, ene. 2021.

Descargas

Los datos de descargas todavía no están disponibles.
Publicado
2021-01-30
Sección
Artículos de investigación

Métricas