Comparación y validación de modelos para el diseño de diámetros óptimos económicos de tuberías: estudio de caso en la región de Anseba, Eritrea

Palabras clave: Diseño de tamaños de tubería óptimo, red de flujo presurizado, modelo de análisis del costo del ciclo de vida, modelos de ecuaciones empíricas, análisis estadístico

Resumen

Un diseño óptimo para una red de tuberías de flujo presurizado se caracteriza por ser económico y por evitar la menor cantidad de pérdidas durante la transmisión de agua a través del sistema. Por su parte, un tamaño de tubería óptimo hace referencia al diámetro de una tubería en un sistema de red que brinda el efecto deseado generando una cantidad mínima de desperdicios y gastos. El modelo de análisis del costo del ciclo de vida (LCCA, por sus siglas en inglés) es ampliamente reconocido como la técnica estándar recomendada para estimar el tamaño de tubería óptimo para cualquier sistema de red de tuberías. Se han propuesto múltiples fórmulas empíricas que buscan simplificar los cálculos inherentes en dicho modelo de análisis económico. El objetivo de este estudio consistió en comparar los modelos empíricos que varios autores han propuesto, a partir de diversas variables físicas involucradas en la dinámica del flujo de líquidos, con el fin de seleccionar el diámetro óptimo para la red en la granja del Hamelmalo Agricultural College, ubicada en la región de Anseba, en Eritrea,y su distribución de agua a las distintas subparcelas. Para ello se eligieron once ecuaciones empíricas diferentes. Los diámetros resultantes se compararon con el diámetro estándar calculado, utilizando, a su vez, el método estándar de análisis del costo del ciclo de vida. Dicha comparación se basó en la estimación de las pérdidas de carga total y el análisis económico de los diámetros de tubería elegidos para dicha red. Además, se realizó un análisis estadístico para obtener el diámetro modelado recomendado con el mejor ajuste para la red. El rendimiento del modelo de Bresse fue el más adecuado en comparación con el modelo LCCA.

Biografía del autor/a

Aanandsundar Arumugam*, Alma Mater Studiorum Università di Bologna, Italy

Alma Mater Studiorum Università di Bologna, Italy, College of Engineering and Technology Mai Nefhi, Bologna-Italy aanandsunda.arumugam@studio.unibo.it

Sobana Subramani, Easwari Engineering College, India

Easwari Engineering College, Affiliated to Anna University, Chennai-India, sobana.s@eec.srmrmp.edu.in

Haben Kibrom, Hamelmalo Agricultural College, Eritrea

Hamelmalo Agricultural College, Keren-Eritrea, habenkibrom1334@gmail.com

Medhanie Gebreamlak, Hamelmalo Agricultural College, Eritrea

Hamelmalo Agricultural College, Keren-Eritrea, medhaniegebreamlak678@gmail.com

Michael Mengstu, Hamelmalo Agricultural College, Eritrea

Hamelmalo Agricultural College, Keren-Eritrea, michaelmengstu555@gmail.com

Merhawit Teame, Hamelmalo Agricultural College, Eritrea

Hamelmalo Agricultural College, Keren-Eritrea, merhawitteame555@gmail.com

Referencias bibliográficas

[[1] A. Sonowal; S. C. Senapati; S. Adamala, “A Mathematical Model for the Selection of an Economical Pipe Size in Pressurized Irrigation Systems”, Afr. J. Agric. Res, vol. 11, no. 8, pp. 683-692, Feb. 2016. http://dx.doi.org/10.5897/AJAR2015.10648

R. W. Whitesides, “Selecting the Optimum Pipe Size” PDH Online Course M270 (12 PDH), 2012. https://pdhonline.com/courses/m270/m270content.pdf

A. Bedjaoui; B. Achour; M.T. Bouziane, “NouvelleApprochePour Le Calcul du DiametreEconomiquedans les Conduites de Refoulement,” Courrier du Savoir, vol. 6, no. 6, pp. 141-145, Jun. 2005. https://www.asjp.cerist.dz/en/article/77967

G. K. Roy, “Prediction of Optimum Economic pipe Diameter by Nomograph, Journal of the Institution of Engineers vol. 68, no. 3, pp. 83-85, Jun. 1988. http://dspace.nitrkl.ac.in/dspace/bitstream/2080/953/1/gkroy%2060.pdf

J.N. Adams, “Quickly Estimate Pipe Sizing with ‘Jack’s Cube’”, Chemical Engineering Progress, vol. 93, no. 12, pp. 55-58, Dec. 1997.

F.M. Sani; S. Huizinga; K. A. Esaklul; S. Nesic, “Review of the API RP 14E Erosional Velocity Equation: Origin, Applications, Misuses, Limitations and Alternatives”, Wear, vol. 426-427, pp. 620-636, Apr. 2019. https://doi.org/10.1016/j.wear.2019.01.119

M. R. Sakr; E. A. Gooda, “Economical Velocity through Pipeline Networks ‘Case Studies of Several Different Markets’”, Alexandria Engineering Journal, vol. 57, no. 4, pp. 2999-3007, Dec. 2018. https://doi.org/10.1016/j.aej.2018.05.001

A. P. Savva; K. Frenken, “Planning, Development Monitoring and Evaluation of Irrigated Agriculture with Farmer Participation”, in Irrigation Manual, Southern Africa: Food and Agriculture Organization of the United Nations (FAO), vol. 2, no.7, 2002. https://www.fao.org/3/ai599e/ai599e.pdf

V. E. M. G. Diniz; P.A. Souza, “Four Explicit Formulae for Friction Factor Calculations in Pipe Flow”, WIT Transactions on Ecology and the Environment, vol.125, pp. 369-380, 2009. http://dx.doi.org/10.2495/WRM090331

J. L. Zocoler; F. C. B. Filho; L.A.F. Oliveira; F.B.T.Hernandez, “Model for determining Flow Diameter and Economic Velocity in Water Elevating Systems”, Math. Probl. Eng, vol. 2006, pp.1-17, Jun. 2006. http://dx.doi.org/10.1155/MPE/2006/17263

A. Arumugam; H. Kibrom; M. Gebreamlak; M. Teame; M. Mengstu, “Modeling of Pipe diameter using Velocity Method for Pressurized Flow Pipe Network at Hamelmalo Agricultural College- A Case Study”, Ann. Fac. Eng. Hunedoara- International Journal of Engineering, vol. 18, no. 3, pp. 85-92, Aug. 2020. http://annals.fih.upt.ro/pdf-full/2020/ANNALS-2020-3-10.pdf

F. Du; G. J. Woods; D. Kang; K.E. Lansey; R. G. Arnold, “Life Cycle Analysis for Water and Wastewater Pipe Materials”, Journal of Environmental Engineering, vol. 139, no.5, pp. 703-711, May. 2013. http://dx.doi.org/10.1061/(ASCE)EE.1943-7870.0000638

S.J. Van Vuuren, “Application of genetic algorithms- Determination of the optimal pipe diameters”, Water SA, vol. 28, no. 2, pp. 217-226, Mar. 2002. http://dx.doi.org/10.4314/wsa.v28i2.4888

R. H. Mohtar; V. F. Bralts; W. H. Shayya, “A Finite Element Model for the Analysis and Optimization of Pipe Networks”, Transactions of the ASAE, vol. 34, no. 2, pp. 393-401, Mar. 1991. http://dx.doi.org/10.13031/2013.31674

A. R. Simpson; G. C. Dandy; L. J. Murphy, “Genetic Algorithms compared to other Techniques for Pipe Optimization”,J.WaterResour. Plan. Manag, vol.120, no. 4, pp. 423-443, Jul. 1994. http://dx.doi.org/10.1061/(ASCE)0733-9496(1994)120:4(423)

R. E. Featherstone; K.K. El-Jumaily, “Optimal Diameter selection for Pipe Networks”,Journal of Hydraulic Engineering, vol. 109, no. 2, pp. 221-234, Feb. 1983. https://doi.org/10.1061/(ASCE)0733-9429(1983)109:2(221)

R. B. Shrestha et al., “Protocol for Reviving Springs in the Hindu Kush Himalaya: A Practitioner’s Manual”, International Centre for Integrated Mountain Development (ICIMOD), Kathmandu, 2018. http://nhp.mowr.gov.in/docs/NHP/MISCELLANEOUS/MISCELLANEOUS/1271/SpringManual04-2018.pdf

S. Folkman, “Validation of the long life of PVC Pipes”, In Proceedings of the 17th Plastic Pipes Conference PPXVII, Chicago, 2014, pp. 1-9. http://www.thinkpipesthinkpvc.com.au/images/pdfs/17_Plastic_Pipe_Conference/Steven_FOLKMAN_2A.pdf

B. K. Saleh; R. W. Kasili; E. G. Mamati; W. Araia; A. B. Nyende, “Classification of Local Pepper Collections (Capsicum spp.) from Eritrea using Morphological Traits”, Am. J. Plant Sci, vol. 7, no. 3, pp. 590-600, Mar.2016. http://dx.doi.org/10.4236/ajps.2016.73052

A. Omer et al., “Design of Optimal Irrigation Pipe Network for Hamelmalo Agricultural College Farm”, (Bachelor thesis), Department of Agricultural Engineering, Hamelmalo Agricultural College, Keren, 2013.

R. D. Sonar; S. V. Alashi; D. C. Pawar; S. K. Deshmukh; S. H. Ambekar; T. M. Patil.,“Design and Manufacturing of PVC Pipe Chassis for Electric Cart”,IJARIIE, vol. 6, no. 2, pp. 20-30, 2020.https://ijariie.com/AdminUploadPdf/DESIGN_AND_MANUFACTURING_OF_PVC_PIPE_CHASSIS_FOR_ELECTRIC_CART_ijariie11490.pdf

Engineering ToolBox, “Comparing Friction Loss in Steel, Copper and Plastic Pipes. Water flow and friction head loss (ft/100 ft) in steel, copper and PVC plastic pipes”, 2004. https://www.engineeringtoolbox.com/friction-loss-copper-steel-plastic-pipes-d_807.html

M. Annan; E. A. Gooda, “Effect of Minor Losses during Steady Flow in Transmission Pipelines- Case Study ‘Water Transmission System Upgrade in Northern Saudi Arabia”, Alex. Eng. J, vol. 57, no. 4, pp. 4299-4305, Dec. 2018. https://doi.org/10.1016/j.aej.2018.12.002

Kahramaa, “Principles for Water Network Design”, KAHRAMAA, Doha, 2014.

D. Brkić; P. Praks, “Accurate and efficient explicit approximations of the Colebrook flow friction equation based on the Wright ω-Function”,Mathematics, vol. 7, no. 1, pp. 1-15, Dec. 2018. https://doi.org/10.3390/math7010034

J. Keller; R. D. Bliesner, Sprinkle and Trickle Irrigation, Van Nostrand Reinhold, 1990.

C. H. de Araujo Gama; V. C.Borges de Souza; N. H. Callado, “Analysis of Methodologies for Determination of the Economic Pipe Diameter”,RBRH,vol. 24, no. 35, pp. 1-8, Aug. 2019. https://doi.org/10.1590/2318-0331.241920180148

B. G. Bataller, “Pipe and Tube Sizing”, Lecture on ChE 192”. https://dokumen.tips/documents/pipe-and-tube-sizing.html

H. M. Paula, “Sistemas Prediais de combate a lncȇndio Hidrantes”, Departamento de Engenharia Civil Disciplina: Sistemas Prediais 2, Notas de Aula”, 2011.https://silo.tips/download/notas-de-aula-sistemas-prediais-de-combate-a-incendio-hidrantes

S. B. Genić; B. M. Jaćimović; V. B. Genić, “Economic Optimization of pipe diameter for complete turbulence”, Energy and Buildings, vol.45, pp. 335-338, Feb. 2012. http://dx.doi.org/10.1016/j.enbuild.2011.10.054

P. Bogawski; E. Bednorz, “Comparison and Validation of Selected Evapotranspiration Models for Conditions in Poland (Central Europe)”, Water Resources Management, vol. 28, no. 14, pp. 5021-5038, Sep. 2014. http://dx.doi.org/10.1007/s11269-014-0787-8

S. Alexandris; R. Stricevic; S. Petkovic, “Comparative analysis of reference evapotranspiration from the surface of rainfed grass in central Serbia, calculated by six empirical methods against the Penman-Monteith formula”, European Water, vol. 21/22, pp. 17-28, Jan. 2008. https://www.ewra.net/ew/pdf/EW_2008_21-22_02.pdf

C.J. Willmott; S. M. Robeson; K. Matsuura, “A refined index of model performance”, Int. J. Climatol, vol. 32, no. 13, pp. 2088-2094, Sep. 2011. http://dx.doi.org/10.1002/joc.2419

S. Genić; I. Arandjelović; P. Kolendić; M. Jarić; N. Budimir; V. Genić, “A Review of Explicit approximations of Colebrook’s Equation”, FME Transactions, vol. 39, no. 2, pp.67-71, Jun. 2011. https://scindeks-clanci.ceon.rs/data/pdf/1451-2092/2011/1451-20921102067G.pdf

A. P. de Camargo; B. Molle; S. Tomas; J. A. Frizzone, “Assessment of clogging effects on lateral hydraulics: proposing a monitoring and detection protocol”, Irrig Sci, vol. 32, no. 3, pp. 181-191, Dec. 2013. http://dx.doi.org/10.1007/s00271-013-0423-z

A. P. de Camargo; P. C. Sentelhas, “Performance Evaluation of different potential Evapotranspiration estimating methods in the state of São Paulo, Brazil”, Revista Brasileira de Agrometeorologia, vol. 5, no. 1, pp. 89-97, Jan. 1997. https://www.scirp.org/(S(351jmbntvnsjt1aadkposzje))/reference/referencespapers.aspx?referenceid=1230313

M. H. Ali; I. Abustan, “A New Novel Index for Evaluating Model Performance”, Journal of Natural Resources and Development, vol. 4, pp. 1-9, Jan. 2014. http://dx.doi.org/10.5027/jnrd.v4i0.01

A. Netto; M. Fernández; Manual de hidráulica, 9th ed. São Paulo: Edgard Blücher Ltda, 2015.

Cómo citar
[1]
A. . Arumugam, S. Subramani, H. Kibrom, M. Gebreamlak, M. Mengstu, y M. Teame, «Comparación y validación de modelos para el diseño de diámetros óptimos económicos de tuberías: estudio de caso en la región de Anseba, Eritrea», TecnoL., vol. 24, n.º 52, p. e1992, dic. 2021.

Descargas

Los datos de descargas todavía no están disponibles.
Publicado
2021-12-01
Sección
Artículos de investigación

Métricas