Multicriteria Evaluation of Export Barriers in the Wood Furniture Sector in Antioquia, Colombia

Keywords: exports, trade barriers, wooden furniture, decision making, fuzzy logic

Abstract

Objective: This study aims to empirically evaluate the barriers to exporting faced by the wood furniture sector in the department of Antioquia, Colombia.
Design/methodology: A fuzzy multicriteria analysis model was employed to determine exporters’ perceptions of the extent to which various barriers impact their operations. These barriers were classified as either internal or external. Internal barriers included logistics, production, and human talent, while external barriers encompassed regulations, market dynamics, and competition.
Findings: External barriers were found to have a higher impact (54 %) than internal ones (46 %). Among the external barriers, regulations were the most significant, accounting for 57 % of the total impact. As for internal barriers, logistics were the most influential, representing 63 % of the total impact. At the sub-barrier level, the most critical factors identified were tariffs (17%), high input costs (15 %), and environmental regulations (9 %).
Conclusions: In Antioquia’s wood furniture sector, external barriers—especially regulations—exert a stronger influence on export activity than internal factors. For instance, tariffs, high input costs, and environmental regulations emerged as the primary obstacles. On the internal side, logistical difficulties represent the main constraint for exporting companies.
Originality: This study contributes by identifying the most relevant barriers faced by wood furniture exporters in Antioquia, Colombia. These insights can help prioritize efforts to address key obstacles and facilitate access to global markets. The research provides valuable information to address the specific challenges faced by exporters in this sector in the region.

Author Biographies

Juan Gabriel Vanegas-López, Tecnológico de Antioquia Institución Universitaria

Medellín-Colombia, jvanegas1@tdea.edu.co

Verónica Marcela Morales-Sánchez, Tecnológico de Antioquia Institución Universitaria

Medellín-Colombia, veromoraless0219@gmail.com

Diego Alejandro López-Cadavid, Tecnológico de Antioquia Institución Universitaria

Medellín-Colombia, joven.investigador3@tdea.edu.co

Jorge Aníbal Restrepo-Morales, Tecnológico de Antioquia Institución Universitaria

Medellín-Colombia, jrestrepo@tdea.edu.co

References

Abu, F., Gholami, H., Saman, M. Z. M., Zakuan, N., y Streimikiene, D. (2019). The implementation of lean manufacturing in the furniture industry: A review and analysis on the motives, barriers, challenges, and the applications. Journal of Cleaner Production, 234, 660-680. https://doi.org/10.1016/j.jclepro.2019.06.279

Abu, F., Saman, M. Z. M., Garza-Reyes, J. A., Gholami, H., y Zakuan, N. (2022). Challenges in the implementation of lean manufacturing in the wood and furniture industry. Journal of Manufacturing Technology Management, 33(1), 103-123. https://doi.org/10.1108/JMTM-01-2021-0029

Aghdaie, M. A. (2017). Data mining group decision-making with FAHP: An application in supplier evaluation and segmentation. En A. Emrouznejad, y W. Ho (aut.), Fuzzy Analytic Hierarchy Process (pp. 99-124). Chapman and Hall/CRC. https://www.taylorfrancis.com/chapters/edit/10.1201/9781315369884-4/data-mining-group-decision-making-fahp-mohammad-hasan-aghdaie

Baena Rojas, J. J., y Londoño Pineda, A. A. (2020). Tariff barriers and non-tariff barriers: appraising Colombia's protectionism. World Customs Journal, 14(1), 71-93. https://doi.org/10.55596/001c.116310

Bertrand, O., Betschinger, M. A., y Brea-Solís, H. (2022). Export barriers for SMEs in emerging countries: A configurational approach. Journal of Business Research, 149, 412-423. https://doi.org/10.1016/j.jbusres.2022.05.045

Besch, K. (2005). Product-service systems for office furniture: barriers and opportunities on the European market. Journal of Cleaner Production, 13(10-11), 1083-1094. https://doi.org/10.1016/j.jclepro.2004.12.003

Buckley, J. (1985). Fuzzy hierarchical analysis. Fuzzy Sets and Systems, 17(3), 233-247. https://doi.org/10.1016/0165-0114(85)90090-9

Cardoza, G., Fornes, G., Farber, V., Gonzalez Duarte, R., y Ruiz Gutierrez, J. (2016). Barriers and public policies affecting the international expansion of Latin American SMEs: Evidence from Brazil, Colombia, and Peru. Journal of Business Research, 69(6), 2030-2039. https://doi.org/10.1016/j.jbusres.2015.10.148

Chang, D. (1996). Applications of the extent analysis method on fuzzy AHP. European Journal of Operational Research, 95(3), 649-655. https://doi.org/10.1016/0377-2217(95)00300-2

Chowdhury, S., Haque, K. A., y Sumon, M. (2015). Implementation of Lean Strategies in a Furniture Manufacturing Factory. Journal of Mechanical and Civil Engineering, 12(1), 45-50. https://www.iosrjournals.org/iosr-jmce/papers/vol12-issue1/Version-3/H012134550.pdf

Colak, M., Cetin, T., y Engin, B. (2015). Reasons for inability of organizations furniture industry to get into international markets. Procedia Economics and Finance, 26, 818-826. https://doi.org/10.1016/S2212-5671(15)00886-2

Dalalah, D., Khan, S. A., Al-Ashram, Y., Albeetar, S., Abou Ali, Y., y Alkhouli, E. (2022). An integrated framework for the assessment of environmental sustainability in wood supply chains. Environmental Technology & Innovation, 27, 102429. https://doi.org/10.1016/j.eti.2022.102429

Dirección de Impuestos y Aduanas Nacionales. (2017). Estadísticas de comercio exterior. https://www.dian.gov.co/dian/cifras/Paginas/EstadisticasComEx.aspx

Deardorff, A. V., y Stern, R. M. (2005). Empirical analysis of barriers to international services transactions and the consequences of liberalization. En Quantitative Methods for Assessing The Effects Of Non-Tariff Measures And Trade Facilitation (pp. 549-609).

Escandón, D. M., Hurtado Ayala, A., y Castillo Caicedo, M. (2013). Influencia de las barreras a la exportación sobre el compromiso exportador y su incidencia en los resultados internacionales. Revista Ean, (75), 38-55. https://doi.org/10.21158/01208160.n75.2013.770

Escandón-Barbosa, D., Hernandez-Espallardo, M., y Rodriguez, A. (2016). International market orientation and international outcomes. Global Economy Journal, 16(4), 669-696. https://doi.org/10.1515/gej-2015-0037

Fedemaderas. (2022). Boletín Estadístico Forestal 2022. Federación Nacional de Industriales de la Madera. https://fedemaderas.org.co/boletin-estadistico-forestal-2022/

Fedemaderas. (2023). Exportaciones colombianas de muebles. Federación Nacional de Industriales de la Madera. https://fedemaderas.org.co/exportaciones-colombianas-de-muebles/

Ghauri, P., Strange, R., y Cooke, F. (2021). Research on international business: The new realities. International Business Review, 30(2), 101794. https://doi.org/10.1016/j.ibusrev.2021.101794

Guerrero Molina, M. I., y Vásquez Suárez, Y. A. (2020). Características de la logística y la infraestructura de Puerto Antioquia, en las exportaciones antioqueñas. En-Contexto, 8(13), 169-193. https://doi.org/10.53995/23463279.717

Han, X., Wen, Y., y Kant, S. (2009). The global competitiveness of the Chinese wooden furniture industry. Forest Policy and Economics, 11(8), 561-569. https://doi.org/10.1016/j.forpol.2009.07.006

Invías. (2022, 4 de marzo). Con una inversión superior a los 23 billones de pesos, el Gobierno nacional a través del sector transporte promueve la competitividad del departamento de Antioquia. Instituto Nacional de Vías. https://www.invias.gov.co/index.php/informacion-institucional/43-inicio/4474-con-una-inversion-superior-a-los-23-billones-de-pesos-el-gobierno-nacional-a-traves-del-sector-transporte-promueve-la-competitividad-del-departamento-de-antioquia

Kahiya, E. T. (2018). Five decades of research on export barriers: Review and future directions. International Business Review, 27(6), 1172-1188. https://doi.org/10.1016/j.ibusrev.2018.04.008

Kaputa, V., Paluš, H., y Vlosky, R. (2016). Barriers for wood processing companies to enter foreign markets: a case study in Slovakia. European Journal of Wood and Wood Products, 74, 109-122. https://doi.org/10.1007/s00107-015-0954-5

Kaufmann, A., y Gupta, M. M. (1991). Introduction to fuzzy arithmetic: Theory and applications. Van Nostrand Reinhold.

Kogler, C., y Rauch, P. (2023). Lead time and quality driven transport strategies for the wood supply chain. Research in Transportation Business & Management, 47, 100946. https://doi.org/10.1016/j.rtbm.2023.100946

Lenis Ballesteros, C. A., y Rave Herrera, C. C. (2015). Antioquia en vías. Rutas para la transformación. Gobernación de Antioquia / Centro de Ciencia y Tecnología de Antioquia.

Leonidou, L. (1995). Empirical research on export barriers: review, assessment, and synthesis. Journal of International Marketing, 3(1), 29-43. https://doi.org/10.1177/1069031X950030010

Lozano, A. R. (2017). Las barreras no arancelarias, como dificultad a superar para exportar a Canadá por productores colombianos. Revista Logos, Ciencia & Tecnología, 8(2), 221-234. https://doi.org/10.22335/rlct.v8i2.311

Martínez Carazo, P. C. (2009). Proceso del desarrollo exportador de la PYME colombiana. Cuadernos de Gestión, 9(1), 47-65. https://doi.org/10.5295/cdg.19081pm

Martínez-Cortés, O. G., Kant, S., y Isufllari, H. (2024). Forest sector models for tropical countries-A case study of Colombia. Forest Policy and Economics, 169, 103341. https://doi.org/10.1016/j.forpol.2024.103341

Martínez-Cortés, O. G., Kant, S., y Isufllari, H. (2022). An analysis of wood availability under six policy scenarios of commercial forest plantations in Colombia. Forest Policy and Economics, 138, 102722. https://doi.org/10.1016/j.forpol.2022.102722

Murphy, J. T. (2012). Global production networks, relational proximity, and the sociospatial dynamics of market internationalization in Bolivia's wood products sector. Annals of the Association of American Geographers, 102(1), 208-233. https://doi.org/10.1080/00045608.2011.596384

Netherlands Enterprise Agency. (2023). Agro-logistics in the Colombian Caribbean. https://www.rvo.nl/files/file/2023-04/Agro-logistics%20in%20the%20Colombian%20Caribbean.pdf

Nguyen, P. H. (2022). Two-Stage PLS-SEM and Fuzzy AHP Approach to Investigate Vietnamese SMEs' Export Competitiveness. Computers, Materials & Continua, 72(2), 4107-4123. https://doi.org/10.32604/cmc.2022.026286

Olechowski, A. (1987). Barriers to trade in wood and wood products. En M. Kallio, D. P. Dykstra, y C. S. Binkley (eds.), The Global Forest Sector: An Analytical Perspective (pp. 371-390). Jhon Wiley & Sons.

Otzen, T., y Manterola, C. (2017). Técnicas de Muestreo sobre una Población a Estudio. International Journal of Morphology, 35(1), 227-232. http://dx.doi.org/10.4067/S0717-95022017000100037

Pehlivan, N., Paksoy, T., y Çalik, A. (2017). Comparison of Methods in FAHP with Application in Supplier Selection. En A. Emrouznejad y W. Ho (eds.), Fuzzy Analytic Hierarchy Process (pp. 45-76). CRC Press. https://www.taylorfrancis.com/chapters/edit/10.1201/9781315369884-3/comparison-methods-fahp-application-supplier-selection-nimet-yapici-pehlivan-turan-paksoy-ahmet-%C3%A7alik

Ratnasingam, J., Zbieć, M., Liat, L. C., Ab Latib, H., Othman, K., Amir, M. A., y Jegatheswaran, N. (2022). Status of Lean Manufacturing Practices and Its Influence on the Adoption of Industry 4.0 in the Malaysian Furniture Industry. Annals of Warsaw University of Life Sciences-SGGW. Forestry and Wood Technology, 119, 5-23. https://wulsannals.com/article/160764/en

Roldán Logistics. (2024, 20 de mayo). Puerto Antioquia: nuevo epicentro logístico de Colombia. https://www.roldanlogistics.com/post/puerto-antioquia-nuevo-epicentro-logístico-de-colombia

Saaty, T. (2006). Fundamentals of decision making and priority theory with the analytic hierarchy process (Vol. VI of the AHP series). RWS Publications.

Salas Navarro, K., y Cortabarría Castañeda, L. (2014). Análisis competitivo del sector madera y muebles de la región Caribe de Colombia. Prospectiva, 12(1), 79-89. https://doi.org/10.15665/rp.v12i1.154

Santos Roldán, L. (2014). Factores de éxito en la internacionalización de las empresas del mueble en Andalucía [tesis doctoral, Universidad de Córdoba]. Helvia UCO. http://hdl.handle.net/10396/11794

Sasatani, D., y Eastin, I. L. (2016). Significant factors impacting export decisions of small-and medium-sized softwood sawmill firms in North America. Canadian Journal of Forest Research, 46(1), 67-76. https://doi.org/10.1139/cjfr-2015-0202

Schoch, K. (2020). Case study research. En G. J. Burkholder, K. A. Cox, L. M. Crawford, y J. H. Hitchcock (eds.), Research Design and Methods: An Applied Guide for the Scholar-Practitioner (pp. 245-258). Sage.

Seale, J. L., y Fairchild, G. F. (1994). Trade agreements, competition, and the environment: Gridlock at the crossroads. Journal of Agricultural and Applied Economics, 26(1), 97-107.

Storper, M. (1992). The limits to globalization: technology districts and international trade. Economic Geography, 68(1), 60-93. https://doi.org/10.2307/144041

Susanty, A., Sumiyati, L. S., Syaiful, S., y Nihlah, Z. (2022). The impact of lean manufacturing practices on operational and business performances at SMES in the wooden furniture industry. International Journal of Lean Six Sigma, 13(1), 203-231. https://doi.org/10.1108/IJLSS-08-2020-0124

Topcu, Y. E. (2023). The comparative advantages in the wooden furniture industry: does the export price matter? Competitiveness Review: An International Business Journal, 33(6), 1145-1160. https://doi.org/10.1108/CR-03-2022-0045

Turner, J. A., Buongiorno, J., Zhu, S., y Maplesden, F. (2008). Effect of non-tariff barriers on secondary processed wood product trade: New Zealand exports to the United States, China and Japan. New Zealand Journal of Forestry Science, 38(2/3), 299-319. https://www.scionresearch.com/__data/assets/pdf_file/0003/5583/NZJFS382_32008TURNER299_321.pdf

Uday, R. M., Salman, S., Karim, M. R., Ar Salan, M. S., Islam, M., y Shahriar, M. (2025). Assessing the barriers to lean manufacturing adoption in the furniture industry of Bangladesh: a fuzzy-DEMATEL study. International Journal of Industrial Engineering and Operations Management, 7(1), 44-67. https://doi.org/10.1108/IJIEOM-07-2023-0060

Vanegas López, J. G., Merlos García, J. J., y Mayorga Abril, C. M. (2017). Flower export barriers: a comparative study in Colombia, Mexico and Ecuador. Latin American Business Review, 18(3-4), 227-250. https://doi.org/10.1080/10978526.2017.1354705

Vanegas, J. G., y Restrepo, J. A. (2016). Factores que afectan el posicionamiento de productos en el exterior: el caso del sector floricultor antioqueño. Civilizar Ciencias Sociales y Humanas, 16(30), 145-160. http://www.scielo.org.co/pdf/ccso/v16n30/v16n30a11.pdf

Wang, Q. (2023). Research on the Problems and Countermeasures of China's Wooden Furniture Product Exports. Frontiers in Business, Economics and Management, 7(3), 57-64. https://doi.org/10.54097/fbem.v7i3.5339

Wei, H., Tu, Y., y Zhou, P. (2023). Technical barriers to trade and export performance: Comparing exiting and staying firms. Economic Modelling, 126, 106439. https://doi.org/10.1016/j.econmod.2023.106439

WWF Colombia. (2015). Informe: causas de la ilegalidad de la madera en Colombia un estudio sobre los flujos del comercio de la madera, los actores y los impactos de la tala ilegal. El Bando Creativo. https://wwflac.awsassets.panda.org/downloads/ilegalidadmadera_m3_b18_c5_web.pdf

WWF Colombia. (2024, 12 de febrero). Los devastadores impactos de la deforestación en Colombia. https://www.wwf.org.co/?386550/deforestacion-colombia-causas-consecuencias/

Zadeh, L. A. (1965). Fuzzy Sets*. Information and Control, 8(3), 338-353. https://doi.org/10.1016/S0019-9958(65)90241-X

How to Cite
Vanegas-López, J. G., Morales-Sánchez, V. M., López-Cadavid, D. A., & Restrepo-Morales, J. A. (2025). Multicriteria Evaluation of Export Barriers in the Wood Furniture Sector in Antioquia, Colombia. Revista CEA, 11(26), e3157. https://doi.org/10.22430/24223182.3157

Downloads

Download data is not yet available.
Published
2025-06-06
Section
Research Papers
Crossref Cited-by logo
Article metrics
Abstract views 761
Galley views 538
PDF Views 449
HTML views 29
Other views 60