Evaluation of the Ceramic, Mechanical, and Structural Behavior of Traditional Ceramic Pastes Incorporating Coconut Husk Fibers for Tile Manufacturing in Construction

Keywords: agro-industrial waste valorization, coconut fiber, composite materials, extruded ceramic tiles, firing temperature

Abstract

Environmental degradation has accelerated as a consequence of rapid industrialization. Among the factors that contribute to this deterioration are the production of ceramic tiles and waste generation. Ceramic tile production has become consolidated on the global market, growing at annual rates of nearly 8.5%, while waste generation has increased at an estimated annual rate of 11.7%. Consequently, recent research has focused on developing waste-management strategies to mitigate these impacts. This study evaluated the performance of an unglazed extruded ceramic product incorporating coconut fiber into its ceramic matrix. The material was evaluated at coconut fiber contents of 5%, 10%, and 20% by weight, and fired in a downdraft (beehive) kiln at 950 ºC, 1000 ºC, and 1050 °C, thermal profiles commonly used by the ceramic industry in Norte de Santander. The methodology included the characterization of the mineralogical, chemical, physical, thermal, and technological properties of the raw materials, ceramic pastes, and fired products. The results revealed limitations in the mechanical and technological performance of ceramic tiles. Nevertheless, the incorporation of 5% and 10% coconut fiber combined with firing temperatures above 1000 °C established conditions that favored the manufacturing products with high regional demand and complying with national requirements for interior wall and floor coverings in low-traffic environments. In addition, mixtures containing up to 20% coconut fiber achieved the regulatory requirements for wall tiles. Overall, the findings demonstrate the potential for incorporating agro-industrial waste into conventional ceramic pastes while maintaining acceptable ceramic, mechanical, and structural performance.

Author Biographies

Angie Julieth Manrique, Universidad Francisco de Paula Santander

Cúcuta – Colombia, angiejuliethmm@ufps.edu.co

Leonardo Cely-Illera, Universidad Francisco de Paula Santander

Cúcuta – Colombia, leonardocely@ufps.edu.co

Jairo Cely-Niño, Universidad Francisco de Paula Santander

Cúcuta – Colombia, jairowilgbertocn@ufps.edu.co

References

K. B. Díez Contreras et al., “Elaboración y caracterización de bloques cerámicos extruídos usando cenizas de la combustión de carbón a escala de laboratorio,” Respuestas, vol. 25, no. 1, pp. 28-35, Jan. 2020. https://doi.org/10.22463/0122820X.1897

I. Vesentini, “World ceramic tile industry and market: forecasts to 2025,” Ceramic World Web, ceramicworldweb.com, Jan. 2026. [Online]. Available: www.ceramicworldweb.com/en/economics-and-markets/world-ceramic-tile-industry-and-market-forecasts-2025

Ceramic World Web, “World production and consumption of ceramic tiles,” ceramicworldweb.com, Sep. 2020. [Online]. Available: https://www.ceramicworldweb.com/en/economics-and-markets/world-production-and-consumption-ceramic-tiles-2020

Procolombia, “Una oferta robusta para la demanda internacional,” procolombia.co, Sep. 2024. [Online]. Available: https://procolombia.co/colombiatrade/exportador/articulos/materiales-construccion-colombianos-exportacion#:~:text=Una%20oferta%20robusta%20para%20la,para%20la%20construcci%C3%B3n%20de%20edificaciones

K. Anteliz-Contreras et al., “Feasibility of using moulded cellulose packaging when blended into formulations for manufacturing,” Respuestas, vol. 29, no. 1, pp. 39-51, Jan. 2024. https://doi.org/10.22463/0122820X.4182

L. V. Vega Sánchez, and V. Hernández Correa, “Análisis comparativo de las propiedades físico-químicas y mineralógicas de materias primas arcillosas de México y Colombia evaluando la factibilidad para la producción de materiales cerámicos tradicionales,” Tesis de Pregrado, Universidad Francisco de Paula Santander, Cúcuta, Colombia, 2025. https://catalogobiblioteca.ufps.edu.co/cgi-bin/koha/opac-detail.pl?biblionumber=62370&query_desc=au%2Cwrdl%3A%20leonardo%20cely%20illera

J. Sánchez-Molina et al., “Cisco de café como posible material sustituto de arcilla en la fabricación de materiales cerámicos de construcción en el área metropolitana de Cúcuta,” Respuestas, vol. 23, no. 1, pp. 27-31, Apr. 2018. https://libros.ufps.edu.co/index.php/editorial-ufps/catalog/book/16

D. C. Álvarez-Rozo et al., “Características de las materias primas usadas por las empresas del sector cerámico del área metropolitana de Cúcuta (Colombia),” Bol. Soc. Esp. Cerám. Vidr., vol. 57, no. 6, pp. 247-256, Dec. 2018. https://doi.org/10.1016/j.bsecv.2018.04.002

M. Ouedraogo et al., “Characterization of sugar cane bagasse ash from Burkina Faso for cleaner cement production: Influence of calcination temperature and duration,” Results Mater., vol. 14, p. 100275, Jun. 2022. https://doi.org/10.1016/j.rinma.2022.100275

M. M. Hossain et al., “Durability of mortar and concrete containing alkali-activated binder with pozzolans: a review,” Construct. Build. Mater., vol. 93, pp. 95-109, Sep. 2015. https://doi.org/10.1016/j.conbuildmat.2015.05.094

C. M. Belfiore et al., “An end of waste alternative for volcanic ash: A resource in the manufacture of ceramic tiles,” Construct. Build. Mater., vol. 263, p. 120118, Dec. 2020. https://doi.org/10.1016/j.conbuildmat.2020.120118

J. Jayasree et al., “An Experimental Study on Low Cost Roofing Tiles by Using Agricultural Wastes,” Int. J. Res. Publ. Rev., vol. 4, no. 4, pp. 4825-4830, Apr. 2023. https://doi.org/10.55248/gengpi.234.4.38272

I. S. Vilarinho et al., “Development of eco-ceramic wall tiles with bio-CaCO3 from eggshells waste,” Open Ceram., vol. 9, p. 100220, Mar. 2022. https://doi.org/10.1016/j.oceram.2022.100220

A. S. Engelberth, “Evaluating economic potential of food waste valorization: onward to a diverse feedstock biorefinery,” Curr. Opin. Green Sustain. Chem., vol. 26, p. 100385, Dec. 2020. https://doi.org/10.1016/j.cogsc.2020.100385

V. Raguraman et al., “Utilization of plastic waste and ProsopisJuliflora Ash in making floor tiles,” Mater. Today: Proc., vol. 49, no. 5, pp. 1658-1663, 2022. https://doi.org/10.1016/j.matpr.2021.07.444

Y. Bwambale et al., “Utilization of agricultural residues in ceramic tiles: A review,” Open Ceram., vol. 22, p. 100783, Jun. 2025. https://doi.org/10.1016/j.oceram.2025.100783

X. Yang et al., “Effect of coconut fibers with interfacial improvement on the dynamic performance of cement mortar,” J. Build. Eng., vol. 98, p. 111524, Dec. 2024. https://doi.org/10.1016/j.jobe.2024.111524

S. Ramakrishnan et al., “Adobe blocks reinforced with natural fibres: A review,” Mater. Today: Proc., vol. 45, pp. 6493-6499, 2021. https://doi.org/10.1016/j.matpr.2020.11.377

A. N. Adazabra et al., “Evaluating the technological properties of fired clay bricks incorporated with palm kernel Shell,” J. Build. Eng., vol. 72, p. 106673, Aug. 2023. https://doi.org/10.1016/j.jobe.2023.106673

Y. Millogo et al., “Experimental analysis of pressed adobe blocks reinforced with hibiscus cannabinus fibers,” Constr. Build. Mater., vol. 52, pp. 71-78, Feb. 2014. http://doi.org/10.1016/j.conbuildmat.2013.10.094

Ministerio del Medio Ambiente y Desarrollo Sostenible, “En 2050 habría en el mundo unos 12.000 millones de toneladas de basura plástica, si no se cambian las pautas de consumo,” minambiente.gov, 2022. [Online]. Available: https://www.minambiente.gov.co/comunicado-de-prensa/en-2050-habria-en-el-mundo-unos-12-000-millones-de-toneladas-de-basura-plastica-si-no-se-cambian-las-pautas-de-consumo/

Portafolio, “Empresa que hace bloques con desechos, la más innovadora,” Redacción Portafolio, portafolio.co, Dec. 2012. [Online]. Available: https://www.portafolio.co/negocios/empresas/empresa-bloques-desechos-innovadora-98992

P. Muñoz et al. “Feasibility of using paper pulp residues into fired clay bricks,” J. Clean. Prod., vol. 262, p. 121464, Jul. 2020. http://doi.org/10.1016/j.jclepro.2020.121464

P. Zhao et al., “Conservation of disappearing traditional manufacturing process for Chinese grey brick: Field survey and laboratory study,” Constr. Build. Mater., vol. 212, pp. 531-540, Jul. 2019. http://doi.org/10.1016/j.conbuildmat.2019.03.317

W. D. Callister Jr., and D. G. Rethwisch, Materials science and engineering, 8th ed., New York, NY, USA: Wiley, 2010. https://books.google.com.co/books/about/Materials_Science_and_Engineering_An_Int.html?id=OaIbAAAAQBAJ&redir_esc=y

S. L. Quintero García, and L. O. González Salcedo, “Uso de fibra de estopa de coco para mejorar las propiedades mecánicas del concreto,” Ing. Desarrollo, vol. 20, pp. 134-150, Jul.-Sep. 2026. http://www.redalyc.org/articulo.oa?id=85202010

Z. Moujoud et al., “Study of fired clay bricks with coconut shell waste as a renewable pore-forming agent: Technological, mechanical, and thermal properties,” J. Build. Eng., vol. 68, p. 106107, Jun. 2023. https://doi.org/10.1016/j.jobe.2023.106107

Standard Test Methods for laboratory determination of water (moisture) content of soil and rock by mass, ASTM D2216, American Society for Testing and Materials International, West Conshohocken, Pennsylvania, USA, 2019. https://doi.org/10.1520/D2216-19

S. D. Blanco Meneses et al., “Metodología de conformación de lotes de arcilla para la industria cerámica del área metropolitana de Cúcuta a partir de análisis fisicoquímicos y modelado de mezclas,” Respuestas, vol. 25, no. S2, pp. 53-58, Jan. 2020. https://revistas.ufps.edu.co/index.php/respuestas/article/view/2302

Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils, D4318, American Society for Testing and Materials, West Conshohocken, Pennsylvania, USA, 2017. https://doi.org/10.1520/D4318-17E01

M. Fernández Abajo, Manual sobre fabricación de baldosas, tejas y ladrillos. Terrassa, Spa: Beralmar, 2000. https://es.scribd.com/document/776140565/Manual-Sobre-Fabricacion-de-Ladrillos-Marcelino-Fernandez

J. Sánchez Molina et al., La industria de los chircales artesanales del área metropolitana de Cúcuta. Cúcuta, Col: Editorial UFPS, 2022. https://doi.org/10.22463/9789588489735

D. Betancourt et al., “Influence of the addition of 2% calcium carbonateduring the manufacturing process of red ceramicbrick: drying and firing stage,” Rev. Ing. Constr., vol. 28, no. 2, pp. 113-124, Aug. 2013. http://doi.org/10.4067/S0718-50732013000200001

R. Mondragón et al., “El proceso de secado por atomización: formación de gránulos y cinética de secado de gotas,” Bol. Soc. Esp. Cerám. Vidr., vol. 52, no. 4, pp. 159-168, Jun. 2013. http://hdl.handle.net/10234/82688

I. Sanou et al., “Effect of the coconut fibers and cement on the physico-mechanical and thermal properties of adobe blocks,” Heliyon, vol. 10, no. 19, p. e38752, Oct. 2024. https://doi.org/10.1016/j.heliyon.2024.e38752

I. Elfaleh et al., “A comprehensive review of natural fibers and their composites: An eco-friendly alternative to conventional materials,” Results Eng., vol. 19, p. 101271, Sep. 2023. https://doi.org/10.1016/j.rineng.2023.101271

O. Kizinievič et al., “Analysis of the effect of paper sludge on the properties, microstructure and frost resistance of clay bricks,” Constr. Build. Mater., vol. 169, pp. 689-696, Apr. 2018. https://doi.org/10.1016/j.conbuildmat.2018.03.024

S. Ahmad et al., “Effect of coconut fiber on low-density polyethylene plastic-sand paver blocks,” Ain Shams Eng. J., vol. 14, p. 101982, Aug. 2023. https://doi.org/10.1016/j.asej.2022.101982

M. Ishaq et al., “Industrial waste as clay substitute in brick manufacturing,” Constr. Build. Mater., vol. 477, p. 141359, May. 2025. https://doi.org/10.1016/j.conbuildmat.2025.141359

F. Lachibi et al., “Using glass wastes and bentonite to produce a new ceramic tile,” RMZ – Mater. Geoenviron., vol. 69, no. 3, pp. 1-14, Oct. 2023. http://doi.org/10.2478/rmzmag-2023-0005

C. Martínez et al., “Recovering wastes from the paper industry: Development of ceramic materials,” Fuel Proc. Technol., vol. 103, pp. 117-124, Nov. 2012. http://doi.org/10.1016/j.fuproc.2011.10.017

J. L. Amorós et al., Manual para el control de la calidad de materias primas arcillosas, 2nd ed., Castellón, Spa.: Instituto de Tecnología Cerámica, 2004. https://trobes.uv.es/nde/fulldisplay?vid=34CVA_UV:VU1_NDE&tab=Cataleg&offset=70&docid=alma991001812019706258&query=sub,exact,Veu&context=L&adaptor=Local%20Search%20Engine&lang=ca

H. Winkler, Petrogenesis of metamorphic rocks. Berlin, New York: Springer, 1976. https://link.springer.com/book/10.1007/978-1-4615-9633-2

H. Winkler, Die genese der metamorphen Gesteine. Berlin, New York: Springer, 1967. https://link.springer.com/book/10.1007/978-3-662-29030-9

Ladrillo "bloquelón", NTC 6170, Instituto Colombiano de Normas Técnicas y Certificación ICONTEC, Bogotá, Cundinamarca, Colombia, 2016.

García León et al., “Diseño de mezclas para la fabricación de productos de mampostería en la industria cerámica,” Rev. Politec., vol. 14, no. 26, pp. 19-28, Jan.-Jun. 2018. https://revistas.elpoli.edu.co/index.php/pol/article/view/973/1057

I. Demir et al., “Utilization of kraft pulp production residues in clay brick production,” Build. Environ., vol. 40, no. 11, pp. 1533-1537, Nov. 2005. https://doi.org/10.1016/j.buildenv.2004.11.021

J. A. Muñoz Chaves et al., “Estudio del procesamiento cerámico de las arcillas de la vereda “La Codicia” (Guapi, Colombia) para potencializar su uso en la elaboración de piezas cerámicas,” Rev. Fac. Ing. Univ. Antioquia, vol. 42, pp. 68-78, Dec. 2007. http://www.scielo.org.co/scielo.php?script=sci_arttext&pid=S0120-62302007000400005

M. P. Moreno Quintero et al., “Influencia de la molienda húmeda en el comportamiento estructural y mecánico de productos cerámicos conformados por extrusión de una arcilla del Zulia (Norte de Santander, Colombia),” Bol. Soc. Esp. Cerám. Vidr., vol. 58, no. 5, pp. 190-198, Sep.-Oct. 2019. http://doi.org/10.1016/j.bsecv.2019.01.001

A. Barba-Juan et al., Materias primas para la fabricación de soportes de baldosas cerámicas, 2nd ed. Castellón, Spa: Instituto de Tecnología Cerámica, 2022. https://www.researchgate.net/publication/306077585_Materias_Primas_para_la_Fabricacion_de_Soportes_de_Baldosas_Ceramicas_Raw_Materials_for_Manufacturing_Floor_and_Wall_Tiles

J. Sánchez Molina et al., Aplicaciones de los nutrientes tecnológicos en la industria cerámica del Área Metropolitana de Cúcuta, Cucutá, Col: Editorial UFPS, 2018. https://libros.ufps.edu.co/index.php/editorial-ufps/catalog/book/22

K. S. Shibib, “Effects of waste paper usage on thermal and mechanical properties of fired brick,” Heat Mass Transfer, vol. 51, no. 5, pp. 685-690, May. 2015. http://doi.org/10.1007/s00231-014-1438-6

M. L. Martínez et al., “Utilización de bagazo de la industria cervecera para la producción de ladrillos para construcción,” Mater. Constr., vol. 62, no. 306, pp. 199-212, Jun. 2012. http://doi.org/10.3989/mc.2012.63410

J. Sánchez Molina, and J. I. Díaz García, Introducción a los Hornos utilizados en la industria cerámica tradicional, Cúcuta, Col: Universidad Francisco de Paula Santander, 2011. https://repositorio.ufps.edu.co/handle/ufps/6504

E. Kłosek-Wawrzyn et al., “Sintering Behavior of Kaolin with Calcite,” Procedia Eng., vol. 57, pp. 572-582, 2013. http://doi.org/10.1016/j.proeng.2013.04.073

G. P. Souza et al., “Characteristics and physical-mechanical properties of fired kaolinitic materials,” Cerâmica, vol. 48, no. 306, pp. 102-107, Jun. 2002. https://doi.org/10.1590/s0366-69132002000200009

Q. Yuan et al., “Sustainable ceramic tiles incorporated with waste fly ash from recycled paper production,” J. Clean. Prod., vol. 425, p. 138814, Nov. 2023. https://doi.org/10.1016/j.jclepro.2023.138814

Baldosas cerámicas. Definiciones, clasificación, características y rotulado, NTC 919. Instituto Colombiano de Normas Técnicas y Certificación ICONTEC, Bogotá, Cundinamarca, Colombia, 2022.

Generalitat Valenciana, Instituto Valenciano de la Edificación, Guía de la Baldosa Cerámica, 7th ed. Valencia, Spa: Instituto Valenciano de la Edificación, 2019. https://productos.five.es/producto/guia-de-la-baldosa-ceramica-2019

Unidades de mampostería de arcilla cocida. Ladrillos y bloques cerámicos. Parte 3: mampostería de fachada, NTC 4205-3, Instituto Colombiano de Normas Técnicas y Certificación ICONTEC, Bogotá, Cundinamarca, Colombia, 2009.

Refractarios. Clasificación de ladrillos silicoaluminosos y ladrillos refractarios de alta alúmina, NTC 773, Instituto Colombiano de Normas Técnicas y Certificación ICONTEC, Bogotá, Cundinamarca, Colombia, 2018.

J. Saravanan et al., “Low cost roofing tiles using agricultural wastes,” Int. J. Civ. Eng., vol. 4, no. 3, pp. 58-62, Mar. 2017. https://doi.org/10.14445/23488352/ijce-v4i3p115

N. Quaranta et al., “Use of wastes from the peanut industry in the manufacture of building materials,” International J. Sustain. Dev. Plan., vol. 13, no. 4, pp. 662-670, 2018. https://doi.org/10.2495/sdp-v13-n4-662-670

C. Zanelli et al., “Waste recycling in ceramic tiles: a technological outlook,” Resour. Conserv. Recycl., vol. 168, p. 105289, May. 2021. https://doi.org/10.1016/j.resconrec.2020.105289

Ingeniería civil y arquitectura. Baldosas cerámicas. Parte 6. Método de ensayo para determinar la resistencia a la abrasión profunda en baldosa no esmaltada, NTC 4321-6, Instituto Colombiano de Normas Técnicas y Certificación ICONTEC, Bogotá, Cundinamarca, Colombia, 2015.

How to Cite
[1]
A. J. Manrique, L. Cely-Illera, and J. Cely-Niño, “Evaluation of the Ceramic, Mechanical, and Structural Behavior of Traditional Ceramic Pastes Incorporating Coconut Husk Fibers for Tile Manufacturing in Construction”, TecnoL., vol. 29, no. 67, p. e3766, Sept. 2026.

Downloads

Download data is not yet available.
Published
2026-09-17
Section
Research Papers
Crossref Cited-by logo
Article metrics
Abstract views 160
Galley views 60
PDF Views 60
HTML views 0
Other views 0

Some similar items: