Metodología para la determinación del desplazamiento angular en transformadores trifásicos

  • Nicolás Muñoz-Galeano Universidad de Antioquia
  • Jesús M. López-Lezama Universidad de Antioquia
  • Fernando Villada-Duque Universidad de Antioquia
Palabras clave: Desplazamiento angular, conexiones, transformadores trifásicos, fasores de tensión y de corriente, método gráfico

Resumen

Este artículo presenta una metodología para la determinación del desplazamiento angular (conexiones o grupos horarios (coloquial)) en transformadores trifásicos. La metodología propuesta sirve para determinar el desplazamiento angular si se conocen las conexiones o si se desea determinado desplazamiento angular también poder obtener las conexiones. Si bien la conexión de transformadores trifásicos requiere el conocimiento del desplazamiento angular, la literatura técnica no reporta una metodología o procedimiento riguroso explícito para determinarlas. Sin embargo, existen numerosas aplicaciones en las áreas de ingeniería e investigación que requieren el conocimiento de la conexión y el desplazamiento angular. El artículo presenta la metodología para determinar las conexiones Yy, Yd, Dy, Dd, Zy y Zd; que incluye las aplicaciones de ingeniería más relevantes. La metodología propuesta se puede aplicar de forma indiferente tanto para transformadores comerciales como no comerciales o para transformadores de potencia o de distribución.

Biografía del autor/a

Nicolás Muñoz-Galeano, Universidad de Antioquia
Doctor en Ingeniería Electrónica, Departamento Ing. Eléctrica, Grupo de Manejo Eficiente de la Energía – GIMEL, Facultad de Ingeniería, Universidad de Antioquia, Medellín
Jesús M. López-Lezama, Universidad de Antioquia
Doctor en Ingeniería Eléctrica, Departamento Ing.  Eléctrica, Grupo de Manejo Eficiente de la Energía–GIMEL, Universidad de Antioquia, Medellín
Fernando Villada-Duque, Universidad de Antioquia
Doctor en Ingeniería Eléctrica, Departamento Ing. Eléctrica, Grupo de Manejo Eficiente de la Energía–GIMEL, Universidad de Antioquia, Medellín

Referencias bibliográficas

E. Marlés Sáenz, “Metodología generalizada para determinar los grupos de conexión,” Energía y Comput., vol. 13, no. 2, 2011.

C. A. Hernández Suárez, V. A. Gómez Saavedra, and R. A. Peña Lote, “Sistema de adquisición de datos para determinar el grupo de conexión en el transformador trifásico DL1080,” Tecnura, vol. 18, no. 42, pp. 65–77, 2014.

W. Guo, R. Enen, and T. Mingxing, “A Hybrid Active Compensation Method for Current Balance Based on Y,d11 Connection Traction Transformer,” Power Electronics and Intelligent Transportation System, 2008. PEITS ’08. Workshop on. pp. 582–586, 2008.

G. Ionescu, G. Paltanea, and V. Paltanea, “A method for minimization the harmonic distortions in three-phase inverter devices,” 8th International Syposium on Advanced Topics in Electrical Engineering(ATEE). pp. 1–4, 2013.

H. Mahmood and J. Jiang, “Modeling and Control System Design of a Grid Connected VSC Considering the Effect of the Interface Transformer Type,” IEEE Transactions on Smart Grid, vol. 3, no. 1. pp. 122–134, 2012.

F. Corcoles, L. Sainz, J. Pedra, J. Sánchez-Navarro, and M. Salichs, “Three-phase transformer modelling for unbalanced conditions, Part 1: core modelling and introductory examples,” IET Electric Power Applications, vol. 2, no. 2. pp. 99–112, 2008.

B. Singh, P. Jayaprakash, T. R. Somayajulu, and D. P. Kothari, “Reduced Rating VSC With a Zig-Zag Transformer for Current Compensation in a Three-Phase Four-Wire Distribution System,” IEEE Trans. Power Deliv., vol. 24, no. 1, pp. 249–259, Jan. 2009.

H.-L. Jou, K.-D. Wu, J.-C. Wu, and W.-J. Chiang, “A Three-Phase Four-Wire Power Filter Comprising a Three-Phase Three-Wire Active Power Filter and a Zig-Zag Transformer,” IEEE Trans. Power Electron., vol. 23, no. 1, pp. 252–259, Jan. 2008.

A. N. Arvindan and C. Sanal, “Investigation for harmonic mitigation in the line and neutral currents of three-phase four-wire system feeding two-pulse rectifiers with balanced and unbalanced load using Zig-Zag transformer,” in 2014 IEEE 2nd International Conference on Electrical Energy Systems (ICEES), 2014, pp. 194–201.

Sewan Choi and Minsoo Jang, “Analysis and Control of a Single-Phase-Inverter-Zigzag-Transformer Hybrid Neutral-Current Suppressor in Three-Phase Four-Wire Systems,” IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 2201–2208, Aug. 2007.

P. S. C. Nair and P. P. K., “A novel method for recovery of drainage power from distribution transformers,” Innovative Smart Grid Technologies (ISGT Europe), 2011 2nd IEEE PES International Conference and Exhibition on. pp. 1–5, 2011.

K. Jin and C. Liu, “A Novel PWM High Voltage Conversion Ratio Bidirectional Three-Phase DC/DC Converter With Y–Δ Connected Transformer,” IEEE Transactions on Power Electronics, vol. 31, no. 1. pp. 81–88, 2016.

L. Gu, K. Jin, and C. Liu, “Current-tripler-rectifier pulse width modulation ZVS three-phase full-bridge DC/DC converter with Y–Δ connected transformer,” IET Power Electronics, vol. 8, no. 7. pp. 1111–1118, 2015.

R. Anuraj, A. Sathesh, and S. Smys, “Neutral current and harmonic mitigation using ZSBR with various transformer topologies,” in 2015 2nd International Conference on Electronics and Communication Systems (ICECS), 2015, pp. 1695–1700.

E. Unicrom, “Polaridad de un transformador eléctrico,” 2015. [Online]. Available: http://unicrom.com/polaridad-de-un-transformador-electrico/. [Accessed: 19-Jun-2016].

Cómo citar
[1]
N. Muñoz-Galeano, J. M. López-Lezama, y F. Villada-Duque, «Metodología para la determinación del desplazamiento angular en transformadores trifásicos», TecnoL., vol. 20, n.º 38, pp. 41–53, feb. 2017.

Descargas

Los datos de descargas todavía no están disponibles.
Publicado
2017-02-21
Sección
Artículos de investigación

Métricas

Crossref Cited-by logo