Numerical Study of Critical Recirculation Ratio for Achieving Unconditional MILD Combustion
Abstract
Moderate or Intense Low Oxygen Dilution (MILD) combustion is a regime in which fuels burn in a distributed reaction zone generating ultra-low emissions and no visible flame front. Also known as flameless combustion, it can be achieved by recirculating flue gases into the reaction zone. A recirculation factor based on the mass recirculated is used to characterize a flameless regime. However, the original definition of MILD is based on the temperature levels of a reactor. This work connects both criteria by introducing a parameter called recirculation ratio derived theoretically from a mass balance. The ratio was numerically calculated by simulating a network of perfectly stirred reactors and performing an energy balance using open-source software. This methodology was validated against experimental and simulated data from the literature. Simulations were carried out for methane, ethane, propane, and hydrogen under adiabatic conditions and equivalence ratios from 0.6 to 1. Results indicate that a critical recirculation ratio is required for establishing unconditional MILD combustion, which changes with fuel type and equivalence ratio. In all cases studied, the critical ratio diminishes as the equivalence ratio is reduced. Hydrogen and methane require the highest and lowest critical ratio, respectively. Results suggest that externally diluting hydrogen with carbon dioxide could potentially reduce recirculation requirements for MILD combustion.
References
K. Kohse-Höinghaus, “Clean combustion: Chemistry and diagnostics for a systems approach in transportation and energy conversion,” Progress in Energy and Combustion Science, vol. 65, pp. 1–5, Mar. 2018. https://doi.org/10.1016/j.pecs.2017.10.001
A. Cavaliere and M. De Joannon, “Mild combustion,” Progress in Energy and Combustion Science, vol. 30, no. 4, pp. 329–366, 2004. https://doi.org/10.1016/j.pecs.2004.02.003
A. E. E. Khalil and A. K. Gupta, “Towards colorless distributed combustion regime,” Fuel, vol. 195, pp. 113–122, May. 2017. https://doi.org/10.1016/j.fuel.2016.12.093
J. A. Wünning, and J. G. Wünning, “Flameless oxidation to reduce thermal no-formation,” Progress in Energy and Combustion Science, vol. 23, no. 1, pp. 81–94, 1997. https://doi.org/10.1016/S0360-1285(97)00006-3
S. Sharma and S. Kumar, “Chapter 3 - Historical background of novel flameless combustion,” in Fundamentals of Low Emission Flameless Combustion and Its Applications, S. E. Hosseini, Ed., Academic Press, 2022, pp. 45–79. https://doi.org/10.1016/B978-0-323-85244-9.00012-5
J. Mi, P. Li, F. Wang, K.-P. Cheong, and G. Wang, “Review on MILD Combustion of Gaseous Fuel: Its Definition, Ignition, Evolution, and Emissions,” Energy & Fuels, vol. 35, no. 9, pp. 7572–7607, Apr. 2021. https://doi.org/10.1021/acs.energyfuels.1c00511
K.-P. Cheong, G. Wang, J. Si, and J. Mi, “Nonpremixed MILD combustion in a laboratory-scale cylindrical furnace: Occurrence and identification,” Energy, vol. 216, p. 119295, Feb. 2021. https://doi.org/10.1016/j.energy.2020.119295
K. P. Cheong, G. Wang, J. Mi, B. Wang, R. Zhu, and W. Ren, “Premixed MILD Combustion of Propane in a Cylindrical Furnace with a Single Jet Burner: Combustion and Emission Characteristics,” Energy and Fuels, vol. 32, no. 8, pp. 8817–8829, Jul. 2018. https://doi.org/10.1021/acs.energyfuels.8b01587
P. Li, B. B. Dally, J. Mi, and F. Wang, “MILD oxy-combustion of gaseous fuels in a laboratory-scale furnace,” Combustion and Flame, vol. 160, no. 5, pp. 933–946, May. 2013. https://doi.org/10.1016/j.combustflame.2013.01.024
J. L. Renteria, L. F. Cardona Sepúlveda, and B. A. Herrera Munera, “Effect of burner angle on the heat transfer of a frit furnace,” Revista Facultad de Ingeniería Universidad de Antioquia, no. 100, pp. 21-34, Feb. 2021. https://doi.org/10.17533/udea.redin.20210216
J. Si et al., “Experimental and Numerical Study on Moderate or Intense Low-Oxygen Dilution Oxy-Combustion of Methane in a Laboratory-Scale Furnace under N2, CO2, and H2O Dilutions,” Energy & Fuels, vol. 35, no. 15, pp. 12403–12415, Jul. 2021. https://doi.org/10.1021/acs.energyfuels.1c01590
Y. Tu, S. Xu, M. Xie, Z. Wang, and H. Liu, “Numerical simulation of propane MILD combustion in a lab-scale cylindrical furnace,” Fuel, vol. 290, p. 119858, Apr. 2021. https://doi.org/https://doi.org/10.1016/j.fuel.2020.119858
G. P. Smith et al., “Gri-mech 3.0. detailed mechanism” [Online]. Available: https://chemistry.cerfacs.fr/en/chemical-database/mechanisms-list/gri-mech-3-0/
E. Ranzi, A. Frassoldati, A. Stagni, M. Pelucchi, A. Cuoci, and T. Faravelli, “Reduced Kinetic Schemes of Complex Reaction Systems: Fossil and Biomass-Derived Transportation Fuels,” International Journal of Chemical Kinetics, vol. 46, no. 9, pp. 512–542, Sep. 2014. https://doi.org/https://doi.org/10.1002/kin.20867
E. Ranzi, C. Cavallotti, A. Cuoci, A. Frassoldati, M. Pelucchi, and T. Faravelli, “New reaction classes in the kinetic modeling of low temperature oxidation of n-alkanes,” Combustion and Flame, vol. 162, no. 5, pp. 1679–1691, May. 2015. https://doi.org/10.1016/j.combustflame.2014.11.030
G. Bagheri, E. Ranzi, M. Pelucchi, A. Parente, A. Frassoldati, and T. Faravelli, “Comprehensive kinetic study of combustion technologies for low environmental impact: MILD and OXY-fuel combustion of methane,” Combustion and Flame, vol. 212, pp. 142–155, Feb. 2020. https://doi.org/10.1016/j.combustflame.2019.10.014
Y. Song et al., “The sensitizing effects of NO2 and NO on methane low temperature oxidation in a jet stirred reactor,” Proceedings of the Combustion Institute, vol. 37, no. 1, pp. 667–675, 2019. https://doi.org/10.1016/j.proci.2018.06.115
D. G. Goodwin, R. L. Speth, H. K. Moffat, and B. W. Weber, “Cantera: an object-oriented software toolkit for chemical kinetics, thermodynamics, and transport processes (2.5.1),” Zenodo, 2021. https://doi.org/10.5281/zenodo.4527812
S. Zabarnick and J. Zelina, “Chemical kinetics of NOx production in a well stirred reactor,” In Intersociety Energy Conversion Engineering Conference, Monterrey, CA, U.S.A, 1994, p. 649. https://doi.org/10.2514/6.1994-3828
F. Wang, P. Li, Z. Mei, J. Zhang, and J. Mi, “Combustion of CH4/O2/N2 in a well stirred reactor,” Energy, vol. 72, pp. 242–253, Aug. 2014. https://doi.org/10.1016/j.energy.2014.05.029
C. Luan et al., “Re-recognition of the MILD combustion regime by initial conditions of Tin and XO2 for methane in a non-adiabatic well-stirred reactor,” Energy & Fuels, vol. 34, pp. 2391–2404, Jan. 2020. https://doi.org/10.1021/acs.energyfuels.9b04177
R. Shan and T. Lu, “Ignition and extinction in perfectly stirred reactors with detailed chemistry,” Combustion and Flame, vol. 159, no. 6, pp. 2069–2076, Jun. 2012. https://doi.org/10.1016/j.combustflame.2012.01.023
S. McAllister, J.-Y. Chen, and A. C. Fernandez-Pello, Fundamentals of Combustion Processes. New York: Springer, 2011, p. 314. https://doi.org/10.1007/978-1-4419-7943-8
Y. A. Cengel and M. A. Boles, Thermodynamics: An engineering approach, 8th edition. New York: McGraw-Hill education, 2015.
A. Cavigiolo, M. A. Galbiati, A. Effuggi, D. Gelosa, and R. Rota, “Mild combustion in a laboratory-scale apparatus,” Combustion Science and Technology, vol. 175, no. 8, pp. 1347–1367, 2003. https://doi.org/10.1080/00102200302356
M. Mayrhofer, M. Koller, P. Seemann, R. Prieler, and C. Hochenauer, “Evaluation of flamelet-based combustion models for the use in a flameless burner under different operating conditions,” Applied Thermal Engineering, vol. 183, Part. 1, p. 116190, Jan. 2021. https://doi.org/10.1016/j.applthermaleng.2020.116190
Downloads
Copyright (c) 2023 TecnoLógicas
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Altmetric
