Modeling of Mechanical Properties of Recycled Foamed Asphalt Mix by Nonlinear Regression and Artificial Neural Network and Ranking of Different Designs Using TOPSIS Method
Abstract
Foamed asphalt mixtures, created using reclaimed asphalt pavement (RAP) and foamed bitumen, offer energy savings, reduced use of virgin materials, and lower transportation costs, combining the characteristics of rigid and flexible pavements. This study evaluated the mechanical performance of foamed asphalt mixtures with varying bitumen content (1–3 %) and cement content (0–2 %) to identify the optimal combination for pavement applications. Samples were tested for uniaxial compressive strength (UCS), indirect tensile strength (ITS), resilient modulus (RM), and tensile strength ratio (TSR) under laboratory conditions. To predict the results, a nonlinear regression model and an artificial neural network (ANN) were employed. The ANN model demonstrated greater accuracy with significantly lower prediction errors compared to the nonlinear regression model. The Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) method was then used to select the optimal combination of materials. TOPSIS prioritizes mixtures with the shortest geometric distance to the positive ideal solution (best values for all attributes) and the longest distance from the negative ideal solution. The results showed that UCS and RM increased as the bitumen content increased from 1 % to 2 %, but these properties decreased when the bitumen content exceeded 2 %. In contrast, ITS (dry and saturated) showed continuous improvement with an increase in bitumen content from 1 % to 3 %. TOPSIS analysis identified the mixture with 3 % bitumen and 2 % cement as the optimal combination, achieving the best overall performance in the UCS, ITS, RM, and TSR tests. This study highlights the utility of foamed asphalt mixtures for sustainable construction, demonstrating that ANN predictions and TOPSIS can effectively guide material selection to achieve superior mechanical performance while reducing environmental impact.
References
K. Kuna, G. Airey, and N. Thom, “Mix Design Considerations of Foamed Bitumen Mixture with Reclaimed Asphalt Pavement Material,” Int. J. Pavement Eng., vol. 18, no. 10, pp. 902-915, Jan. 2016. https://doi.org/10.1080/10298436.2015.1126271
B. Marquis, D. Peabody, R. Mallick, and R. Soucie, “Determination of Structural Layer Coefficient for Roadway Recycling Using Foamed Asphalt,” Recycled Materials Resource Center, Instituto Politécnico de Worcester, Final Report, 2003. https://rmrc.wisc.edu/wp-content/uploads/2012/10/p26final.pdf
G. Martinez-Argulles, F. Giustozzi, M. Crispino, and G. W. Flintsch, “Investigating physical and rheological properties of foamed bitumen,” Construction and Building Materials, vol. 72, pp. 423-433, Dec. 2014. https://doi.org/10.1016/j.conbuildmat.2014.09.024
H. Gui-Ping, and W. Wing-Gun, “Laboratory study on permanent deformation of foamed asphalt mix incorporating reclaimed asphalt pavement materials,” Construction and Building Materials, vol. 21, no. 8, pp. 1809-1819, Aug. 2007. https://doi.org/10.1016/j.conbuildmat.2006.05.024
Z. Li, P. Hao, H. Liu, and J. Xu, “Effect of cement on the strength and microcosmic characteristics of cold recycled mixtures using foamed asphalt,” J. Clean. Prod., vol. 230, pp. 956–965, Sep. 2019. https://doi.org/10.1016/j.jclepro.2019.05.156
F. V. Guatimosim, K. L. Vascocelos, L. Liedi, and J. Kim, “Laboratory and field evaluation of cold recycling mixture with foamed asphalt,” Road Materials and Pavement Design, vol. 19, no. 2, pp. 385-399, Dec. 2016. https://doi.org/10.1080/14680629.2016.1261726
K. J. Jenkins, and D. C. Collings, “Mix design of bitumen-stabilised materials-South Africa and abroad,” Road Mater. Pavement, vol. 18, no. 2, pp. 331-349, Aug. 2016. https://doi.org/10.1080/14680629.2016.1213511
H. Gui-Ping, and W. Wing-Gun, “Effects of moisture on strength and permanent deformation of foamed asphalt mix incorporating RAP materials,” Construction and Building Materials, vol. 22, no. 1, pp. 30-40, Jan. 2008. https://doi.org/10.1016/j.conbuildmat.2006.06.033
B. Şimşek, and T. Uygunoğlu, “Multi-response optimization of polymer blended concrete: A TOPSIS based Taguchi application,” Constr. Build. Mater., vol. 117, pp. 251–262, Aug. 2016. https://doi.org/10.1016/j.conbuildmat.2016.05.027
Y. Kim, and H. “david” Lee, “Development of mix design procedure for cold in-place recycling with foamed asphalt,” J. Mater. Civ. Eng., vol. 18, no. 1, pp. 116–124, Feb. 2006. https://doi.org/10.1061/(ASCE)0899-1561(2006)18:1(116)
M. F. Saleh, “Effect of aggregate gradation, mineral fillers, bitumen grade, and source on mechanical properties of foamed bitumen–stabilized mixes,” Transp. Res. Rec., vol. 1952, no. 1, pp. 90–100, Jan. 2006. https://doi.org/10.1177/0361198106195200110
A. Saleh, and L. Gáspár, “Advantages and limitations of using foamed bitumen,” Acta Tech. Jaurinensis, vol. 14, no. 3, pp. 300–314, Mar. 2021. https://doi.org/10.14513/actatechjaur.00587
P. Fu, D. Jones, J. T. Harvey, and S. A. Bukhari, “Laboratory test methods for foamed asphalt mix resilient modulus,” Road Mater. Pavement Des., vol. 10, no. 1, pp. 188–212, Sep. 2011. https://doi.org/10.1080/14680629.2009.9690187
T. Ma, H. Wang, Y. Zhao, X. Huang, and Y. Pi, “Strength Mechanism and Influence Factors for Cold Recycled Asphalt Mixture,” Adv. Mater. Sci. Eng., vol. 2015, p. 181853, Sep. 2015. https://doi.org/10.1155/2015/181853
G. Narendra Goud, “Laboratory and Field Evaluation of Recycled Cold Mixes,” M.S. thesis, National Institute of Technology Warangal, Warangal, India, 2006. https://acortar.link/E3QS5g
J.-Z. Xu and P.-W. Hao, “Study of aggregate gradations in foamed bitumen mixes,” Road Materials and Pavement Design, vol. 13, no. 4, pp. 660–677, Nov. 2012. https://doi.org/10.1080/14680629.2012.742627
P. Fu, D. Jones, J. T. Harvey, and F. A. Halles, “Investigation of the curing mechanism of foamed asphalt mixes based on micromechanics principles,” J. Mater. Civ. Eng., vol. 22, no. 1, pp. 29–38, May. 2010. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000009
D. E. Newcomb et al., “Properties of foamed asphalt for warm mix asphalt applications,” Transportation Research Board, Washington, D.C., 2015. https://doi.org/10.17226/22145
A. Kavussi, and L. Hashemian, “Laboratory evaluation of moisture damage and rutting potential of WMA foam mixes,” Int. J. Pavement Eng., vol. 13, no. 5, pp. 415–423, Jul. 2011. https://doi.org/10.1080/10298436.2011.597859
M. Iwanski, P. Buczynski, and G. Mazurek, "The use of gabbro dust in the cold recycling of asphalt paving mixes with foamed bitumen," B. Pol. Acad. Sci. Tech., vol. 64, no. 4, pp. 763-773, 2016. https://doi.org/10.1515/bpasts-2016-0085
F. A. Halles, and G. Z. Thenoux, “Degree of influence of active fillers on properties of recycled mixes with foamed asphalt,” Transp. Res. Rec., vol. 2095, no. 1, pp. 127–135, Jan. 2009. https://doi.org/10.3141/2095-13
M. Iwański, and A. Chomicz-Kowalska, “Laboratory study on mechanical parameters of foamed bitumen mixtures in the cold recycling technology,” Procedia Eng., vol. 57, pp. 433–442, 2013. https://doi.org/10.1016/j.proeng.2013.04.056
H. Divandari, A. Modarres, S. M. Hosseini Aliabadi, and M. Rostami Enkas, “Presentation of a rutting model of asphalt mixes using indirect tensile strength and Marshall strength test results,” Transp. Infra. Eng., vol. 1, no. 2, pp. 41-54, Jul. 2015. https://doi.org/10.22075/JTIE.2014.163
A. Ameli, S. YoussefDost, and R. Babagoli, " Characteristics of Asphalt Mixtures Made with the Foam Bitumen Technology," Transp. Res., vol. 14, no. 2, pp. 321-334, 2017. https://www.trijournal.ir/article_50995.html
M. R. Keymanesh, H. Ziyari, A. Nasrollah Tabar, and N. Shahriari, “Potential Analysis of Microstructural Parameters and Indirect Tensile Strength in Evaluation of Rutting Performance of Hot Asphalt Mixtures,” Transp. Infra. Eng., vol. 3, no. 1, pp. 69-82, May. 2016. https://doi.org/10.22075/JTIE.2017.1762.1167
J. Little, and C. Moler. MATLAB. R2019B (2019). The MathWorks, Inc., Natick, Massachusetts, United States. Accessed: Apr. 25, 2024. [Online]. Available: https://la.mathworks.com/products/matlab/student.html
Downloads
Copyright (c) 2025 TecnoLógicas

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
| Article metrics | |
|---|---|
| Abstract views | 723 |
| Galley views | 383 |
| PDF Views | 299 |
| HTML views | 23 |
| Other views | 61 |





