Diseño, construcción y fabricación de una máquina prototipo de medición por coordenadas

  • Leonardo de J. Mesa-Palacio Instituto Tecnológico Metropolitano
  • Gabriel Calle-Trujillo Universidad Tecnológica de Pereira
  • Juan J. Arbeláez-Toro Instituto Tecnológico Metropolitano
Keywords: Design, construction, manufacture, coordinate measuring machine.

Abstract

This work is framed as a case study of theoretical and practical. The metrological verification of frame parts type style is done through measurements and calibrations tables. This procedure requires time in the assembly and precision gauges. The research aims to design and build a prototype machine coordinate measurement (CMM) to assist in the verification metrology frame type of motorcycle parts. Based on the determination of the accuracy required in the manufacture of frames: select the structure of the CMM is selected, the geometric tolerances applied to the construction of the frame of the CMM are defined, the dimensional chains and the principles of operation of the system settings and tolerances are analyzed, are manufactured and build the pieces that conform the CMM are manufactured and built. Subsequently, the gathering, verification and display system is designed. Finally, we proceed to the calibration of the CMM, allowing identifying the error and uncertainty of the CMM. The procedure ensures design, construction, and manufacturing of a prototype machine type coordinate measuring bridge capable of measuring a maximum length of 250 mm with a minimum tolerance of ±0.3 mm.

Author Biographies

Leonardo de J. Mesa-Palacio, Instituto Tecnológico Metropolitano
Facultad de Ingenierías, Instituto Tecnológico Metropolitano
Gabriel Calle-Trujillo, Universidad Tecnológica de Pereira

Facultad de Ingeniería Mecánica, Universidad Tecnológica de Pereira

 

Juan J. Arbeláez-Toro, Instituto Tecnológico Metropolitano
Facultad de Ingenierías, Instituto Tecnológico Metropolitano
How to Cite
Mesa-Palacio, L. de J., Calle-Trujillo, G., & Arbeláez-Toro, J. J. (2011). Diseño, construcción y fabricación de una máquina prototipo de medición por coordenadas. TecnoLógicas, (26), 11-25. https://doi.org/10.22430/22565337.28

Downloads

Download data is not yet available.
Published
2011-06-21
Section
Articles

Most read articles by the same author(s)