Implementing IEC 61850-7-420 DER Logical Nodes in a single board computer
Abstract
This article discusses the implementation of a variety of logical nodes (LNs) of power generation systems based on distributed energy resources (DER) in a single board computer (SBC). The SBC allows for the acquisition and encapsulation of analog signals from a photovoltaic (PV) array with batteries, based on the IEC 61850-7-420 standard. To achieve this, an SBC integrated with an analog-digital conversion card (ADC) enables to read the system’s analog values. The SBC communicates with the ADC card to encapsulate the collected data in the IEC 61850 data object by using the corresponding logical node (LN). An open license library was used to create the IEC 61850 server inside the SBC and the driver of the ADC card manufacturer to communicate both cards. This work aims to develop LNs for DERs in such way that manufacturers of power generation technologies based on renewable sources (such as the sun and/or the wind) implement Intelligent Electronic Devices (IED) and controllers in accordance with the scope of the standard for these logical nodes (LNs). Finally, the communication testing of the implementation and the results obtained are presented.
References
[2] A. Timbus, M. Larsson, and C. Yuen, “Active Management of Distributed Energy Resources Using Standardized Communications and Modern Information Technologies,” Ind. Electron. IEEE Trans., vol. 56, no. 10, pp. 4029–4037, 2009.
[3] J. Schmutzler, C. Wietfeld, and C. A. Andersen, “Distributed energy resource management for electric vehicles using IEC 61850 and ISO/IEC 15118,” Veh. Power Propuls. Conf. (VPPC), 2012 IEEE, pp. 1457–1462, 2012.
[4] N. Honeth, W. Yiming, N. Etherden, and L. Nordstrom, “Application of the IEC 61850-7-420 data model on a Hybrid Renewable Energy System,” PowerTech, 2011 IEEE Trondheim, pp. 1–6, 2011.
[5] F. Andren, R. Brundlinger, and T. Strasser, “IEC 61850/61499 Control of Distributed Energy Resources: Concept, Guidelines, and Implementation,” Energy Conversion, IEEE Trans., vol. 29, no. 4, pp. 1008–1017, 2014.
[6] W. Shi, X. Xie, C.-C. Chu, and R. Gadh, “Distributed Optimal Energy Management in Microgrids,” Smart Grid, IEEE Trans., vol. 6, no. 3, pp. 1137–1146, 2015.
[7] H. J. Laaksonen, “Protection Principles for Future Microgrids,” Power Electron. IEEE Trans., vol. 25, no. 12, pp. 2910–2918, 2010.
[8] T. S. Ustun, C. Ozansoy, and A. Zayegh, “Simulation of communication infrastructure of a centralized microgrid protection system based on IEC 61850-7-420,” in Smart Grid Communications (SmartGridComm), 2012 IEEE Third International Conference on, 2012, pp. 492–497.
[9] T. S. Ustun, C. Ozansoy, and A. Zayegh, “Modeling of a Centralized Microgrid Protection System and Distributed Energy Resources According to IEC 61850-7-420,” Power Syst. IEEE Trans., vol. 27, no. 3, pp. 1560–1567, 2012.
[10] T. S. Ustun, C. R. Ozansoy, and A. Zayegh, “Implementing Vehicle-to-Grid (V2G) Technology With IEC 61850-7-420,” IEEE Trans. Smart Grid, vol. 4, no. 2, pp. 1180–1187, Jun. 2013.
[11] T. S. Ustun, C. Ozansoy, and A. Zayegh, “Extending IEC 61850-7-420 for distributed generators with fault current limiters,” in Innovative Smart Grid Technologies Asia (ISGT), 2011 IEEE PES, 2011, pp. 1–8.
[12] A. Apostolov, “Integration of distributed energy resources in electric power systems,” Energize RE Renew. Energy Suppl., no. June, pp. 1–12, 2015.
[13] IEC International Electrotechnical Commission, “Communication networks and systems for power utility automation – Part 7-4: Basic communication structure – Compatible logical node classes and data object classes.” 2010.
[14] IEC International Electrotechnical Commission, “Communication networks and systems for power utility automation – Part 7-2: Basic information and communication structure – Abstract communication service interface (ACSI).” 2010.
[15] IEC International Electrotechnical Commission, “IEC 61850 Part 7-420 DER Logical Nodes: Communication Networks and Systems for Power Utility Automation for Distributed Energy Resources (DER).” 2010.
[16] K. Schwarz, “IEC 61850 and IEC 61400-25 Logical Node Classes.” Netted Automation, p. 7, 2012.
[17] M. Zillgith, “libIEC61850,” 2015. [Online]. Available: http://libiec61850.com/libiec61850/contact/.
[18] IEC International Electrotechnical Commission, “Communication networks and systems for power utility automation – Part 6: Configuration description language for communication in electrical substations related to IEDs.” 2010.